Railway tools

It is designed for lining of the track panels and turnouts, laid on wooden and concrete sleepers, during repairs and maintenance of the railroad.

It is designed for lineal shifting of the rail-track or rails to restore normal gaps between the rails, damaged as a result of track displacement by rolling stock.

It is designed for bending of the rails directly at the point of installation by the required form of section (for station sites, open pits, mines).

Small gear puller is designed to remove the small gear of the drive motor.

It is designed for integration into the system for display of the wheel-motor units of locomotives during diagnostics and repair of locomotive drive engine bearings in the loco depot.

The devices are designed to compress the absorbing apparatus of all types of wagons and locomotives while performing repair work.

The equipment is designed for tensioning of the rails up to 1,200 m with temperature compensation up to 25^оС.

It is designed to obtain the required distance between ferroconcrete (f / c) beams when laying track panel.

It is designed to rearrange and readjust the distance between the sleepers.

Carriage fixing device is designed for suspending the carriages to the body of electric locomotives VL-80, VL-60.

The unit is designed for lifting locomotives KZ4AC and KZ8, keeping them in the top position to gain access to the dismantling of the equipment in the underframe zone.

Press is designed for pressing-out and pressing-in of railroad engine pivot bushings and other types of works.

Used for delivering locomotives to the nearest place of repair in the case of axle locking or fracture.

Устройство используется для закрытия люков полувагонов, в случаях, когда люки деформированы, а также позволяет работать в условиях экстремально низких температур (до -30°), когда на кромках люков грузовых вагонов возникает обледенение

It is intended for installation and dismantling of absorbing devices of locomotives. Allows to carry out technical research and repair of absorbing devices in inspection pits.